I am using the Elizabethan Smock Pattern Generator and I cut a slit in the front of the neck. I have never worked without a "real pattern" before. My intention was to just fold over a small bit and sew it. But it won't lay flat at the bottom. Do I need to cut it a certain way? Should I use a facing? Can someone help me with this please?
Thank you!!
Jessi
You can use a facing or bind the edges using a continuous placket like this: http://vintagesewing.info/1920s/26-fcm/fcm-10.html Scroll down! :D
I have folded the slit to 1/8" and stitched some down and I have made facings for some. I prefer the facings personally, it seems to give the fabric more stability. If you do a facing, don't forget to snip the fabric around the curve. This is to keep the fabric from bunching at the V when you turn it right side out.
Good luck!!
I've reluctantly concluded that facing is best thing to do, but I seem to be facing-cutting-impaired and usually have to cut the darn thing twice.
What doesn't work (for me) is a machine-stitched hem where you just fold the fabric in on itself. It looks fine on the straightaways but gives me great trouble in the corners and/or puckers on the curves.
If your piece is only for very light wear, and you're not too concerned about fabric stability, could you use bias tape to make the neck as a bound hem?
#1.did you fit your smock to your bodice/doublet before you cut the neckline out? I know last minute me!
So yes facing it is the best option and I hope it will not be too large because folding it back if you did not intend to can add some inches.
Cilean
[/font][/color]