I've put in on a loop, that was used for me mug, howere' thinking I can get a sturdy beaded hanging chain for it?
Twas a natal day present from me mummy..
Granted, some of these pictures shows martens and other feathery or furry creations, and all of them are Italian, but you might find it helpful still:
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/bologne/fontana1540bologna.jpg
http://smg.photobucket.com/albums/v31/operafantomet/renaissanceportraits/brescia/parmigianino1534gonzaga.jpg
http://smg.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/veronese1551liviaporziabaltimoreclose.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/laviniavecellio1560.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/titianlavinia1565.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/fasolo1560spaolabg.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/caldogno5.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/venezia2/paolo.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/bologne/fontana1540bologna.jpg
http://img.photobucket.com/albums/v31/operafantomet/renaissanceportraits/bologne/lfontana1580nobbol.jpg
You can definitely use a thick metal chain. You can also bead a belt using very large beads, maybe wooden decorated with gold thread, or pearls, or metal ones.
Thank thee..great ideas, that's why I LOVE THIS FORUM ;D
When noble, I used a fine brass chain, of course, accessorized the fan quite a bit! When middle class, just a ribbon, and attached a mirror to the back!
Well, I've decided to make a beaded holder, teardrop pearls, with smaller blue beads in between.
the thinest I could string it thru is fishing wire..
My q is--at the very end, should I also use fishing wire to loop and hold thru hole?
I would like to reuse this holder to other fans.
Going to sew a loop to fit around my belt, with a Small lobster claw on the back side of the belt.
what other sturdy parts could I use?
What say you?
Gramercy!
All my fans are hung from ribbons that match the handles. I tried the brass chain thing, but until I find one small enough to thread through the handle and still not break easily, I'm still using ribbons.
If you string bead on fishing wire, make sure you melt the knots closed especially if you use a lobster clasp for the fastener.
I could not find a thin one to fit thru the handle...so, next best is wire used for jewelry...All done..howere' , I did sew a small loop for my belt and the wire is wrapped tightly around @ top..
Thank Thee for thy suggestions... ;)