RenaissanceFestival.com Forums

Market Square => Arms and Armor => Topic started by: relicmaker on January 09, 2017, 07:41:17 PM

Title: Spearhead Kit for Spear from the movie "DRAGONSLAYER"!!!
Post by: relicmaker on January 09, 2017, 07:41:17 PM
"Dragonslayer"

~ THE SPEAR ~

"Sicarius Dracorum"

""Blacksmith, have you ever forged a weapon?"
(pause for effect...)
"This is 'Sicarius Dracorum'! 'Dragonslayer'!!!"


I have a few of these for sale for $150!!!


This is the Kit to build yourself a fully functional "Spear" that is exactly like the one in the Cult Classic movie "Dragonslayer"!!!

It includes everything you need, except the wood pole, but I've included a link below where you can buy the 8' x 1 1/4" pole.

Photos 4,5,6, and 7 show what the Spear will look like when completed.  (Wood Pole NOT included! Found at Home Depot!)

Kit Includes: Spearhead, Spike Attachment, End Cap, Nails, Leather Strap   

Measurements:
Spearhead is 28 inches long with a 20 inch blade, and is "1095 CARBON STEEL"!!!!


The Spearhead is made to fit a 8 foot by 1 1/4 inch wood dowel rod, which can be found online here: http://totalwoodstore.com/unfinished-round-wooden-dowels/ (http://totalwoodstore.com/unfinished-round-wooden-dowels/)

Or at Home Depot in the 'Closet Organizer' section at Home Depot, which is an 8 foot 'Oak Closet Rod'.
Home Depot also carries the 1 1/4" in Pine in the lumber section of the store.

So, total length of the Spear when completed should be around 10 feet !

Here are the video tutorials for preparing the Wood Rod and assembling the Spear Kit!

https://www.youtube.com/watch?v=ogfWiHIdakQ (https://www.youtube.com/watch?v=ogfWiHIdakQ)

https://www.youtube.com/watch?v=2Iu1dfGKlXU (https://www.youtube.com/watch?v=2Iu1dfGKlXU)

(http://propandartifact.com/Images/Dragonslayer/SpearheadFinal4.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearheadFinal2.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearheadFinal3.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearLandscape2.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearFinal2.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearFinal3.jpg)

(http://propandartifact.com/Images/Dragonslayer/SpearFinal4.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear1.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear2.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear3.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear4.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear5.jpg)

(http://propandartifact.com/Images/Dragonslayer/DragonslayerSpear6.jpg)
Title: Re: Spearhead Kit for Spear from the movie "DRAGONSLAYER"!!!
Post by: FrankJackson87 on March 14, 2017, 07:21:46 AM
Looks epic! That's what I was looking for. I will contact you soon.